Table of Contents
Advertisement
4.3.9
LCD Panel
The disassembly method for the LCD panel differs per panel
type, so the following description is generic. The number and
position of screws is panel-specific. Therefore, not all screws
necessarily need to be present!
Refer to next figure for details.
1. Remove the Main Supply Panel from the set as earlier
described.
2. Unplug the connectors from the loudspeakers.
1
2
2
1
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
•
Pay special attention not to damage the EMC foams.
Ensure that EMC foams are mounted correctly (one is
located above the LVDS connector on the display, between
the LCD display and the metal sub-frame).
Mechanical Instructions
1
1
Figure 4-12 LCD panel
LC7.1E LB
3. Do NOT forget to unplug the LVDS connector from the
LCD Interface Board. Important: Be careful, as this is a
fragile connector!
4. Remove all other remaining connectors.
5. Remove the screws [1] of the central sub-frame.
6. Lift the entire central sub-frame from the set (incl. SSB, and
Side I/O boards and wiring).
7. The LCD panel can now be lifted from the front cabinet.
1
1
4.
EN 11
1
2
2
H_17170_032.eps
310707
Advertisement
Table of Contents
