Table of Contents
Advertisement
EN 10
4.
LC7.1E LB
4.3.7
Main Supply Board
1. Refer to next figure.
2. Unplug all cables.
3. Remove the fixation screws [1].
4. Take the board out (it hinges at the left side).
Figure 4-10 Main supply panel
3
3
3
Mechanical Instructions
4.3.8
1
H_17170_030.eps
220507
3
3
Figure 4-11 SSB removal
Small Signal Board (SSB)
1. Refer to next figure.
2. Disconnect all cables [1] on the SSB. Be careful not to
damage the fragile LVDS cable [2].
3. Remove the screws [3] that hold the SSB.
4. Remove the screws [4] that hold the CINCH and HDMI
connectors at the connector panel.
5. Lift the SSB from the set.
2
1
4
4
3
3
3
3
4
4
H_17170_031.eps
310707
Advertisement
Table of Contents
