Dcancelstartupgct - Planar DX/PCI User Manual

Display controller
Hide thumbs Also See for DX/PCI:
Table of Contents

Advertisement

DCancelStartupGCT

Purpose Use
particular screen. When you start the Windows operating
system after setting this function, the default (linear) GCT
loads for the indicated screen. This function takes effect
only when you restart the Windows operating system.
Syntax
DWORD DCancelStartupGCT (wScreenNumber)
Return value
DWORD –
otherwise, operating system error code.
Example This example cancels the initial GCT for screen zero (0).
#include <mdpcint.h>
{
DWORD
dwRetCode = DCancelStartupGCT (0);
return dwRetCode;
}
See also
DSetStartupGCT

DCancelStartupGCT

Parameter Type
UWORD
zero (0) if function completed successfully;
dwRetCode;
to cancel the startup GCT for a
Name
wScreenNumber
DCancelStartupGCT | 53
Description
Target screen number
(zero-based)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dome m2/pciRx/pciDome dx/pciDome rx/pci

Table of Contents