Advertisement
User Manual
English
Modify Network Setting:
Modify the Mode, IP Address, Gateway, Subnet Mask and Telnet Port and select Save to save the settings
which take effect immediately. After any change are made, if the Mode is "Static", it will switch to the
corresponding IP address. If the Mode is set to DHCP, it will automatically search and switch to the IP
address assigned by the connected router.
System Page
Panel Lock: Select On to lock the push buttons on the main unit. Select Off to unlock.
Beep: Select to turn the main units beep notification sound.
Serial Baud Rate: Select the appropriate value to set the serial baud rate.
Firmware Update: Click Browse and then select the firmware update file and click Update to complete the
firmware update.
Factory Reset: Select Reset to reset the matrix to its factory default settings.
Reboot: Select Reboot to reboot the matrix.
Please note: After a factory reset or reboot it will automatically switch to the login page.
Advertisement
