Mars Comfort-Aire Century VCD24 SA Series Installation And Owner's Manual page 6

2. Installation accessory
2. Prepare the following assemblies on the site.
No.
Name
1
Switch box
Wiring Tube(Insulating
2
Sleeve and Tightening
Screw)
Precaution of installing the wired controller
1. This manual provides the installation method of the wired
controller. Please refer to the wiring diagram of this installation
manual to connect the wired controller with indoor unit.
2. The wired controller works in a low voltage loop circuit. DO
NOT directly contact the cable to high voltage above, 24V.
Wiring clearance between configured tubes should be at the
range of 300~500mm or above.
3. The Shielded wire of the wired controller must be grounded.
3
Wired Controller IOM - VCDxxSA
Specification
Qty.(embeded
(only for reference)
into wall)
1
1
Remarks