Wired Controller IOM - VCDxxSA
13. Fault alarm handling
If the system does not properly operate except the above
mentioned cases or the above mentioned malfunctions is
evident, investigate the system according to the following
procedures.
MALFU N C T ION & PROT EC T ION D EFIN E
NO.
Error of communication between wire controler
1
and indoor unit
The errors displayed on the wired controller are different
from those on the unit. If error code appears, please check
the <<Owner's And Installation Manual>>and<<SERVICE
Manual>>.
14.Technical indication and requirement
EMC and EMI comply with the CE certi cation
requirements.
D ISPLAY
D IGITAL TU BE
42