Table of Contents
Advertisement
5.3
LOCKING AND UNLOCKING THE MEMORY
Activating the memory lock allows for preventing the accidental and ran-
dom memorisation of other unintended or unauthorised transmitters.
To do this ("Figure 12"):
1.
press PRG once on the transmitter. The paired LED strip will flash
twice
2.
press PRG once on the transmitter. The paired LED strip will flash
twice
3.
press PRG once on the transmitter. The paired LED strip will flash
three times
4.
simultaneously press
p
flash four times. Release the buttons
5.
– to LOCK the memory press
three times
– to UNLOCK the memory press
five times.
12
1
(x 1)
PRG
x 2
3
(x 1)
PRG
x 3
5 a
(= 5s)
5 b
(= 5s)
5.4
DELETION PROCEDURES
a
The deletion procedures are irreversible. The deletion
of one or more remote controls eliminates the settings
memorised in the system relative to the remote controls
themselves. The FULL deletion procedure restores the
system's factory conditions. At the end of the procedure,
all settings previously memorised will be lost.
and
q
for 5 s. The paired LED strip will
p
for 5 s. The paired LED strip will flash
p
for 5 s. The paired LED strip will flash
2
(x 1)
PRG
4
5a / 5b
(= 5s)
x 4
x 3
x 5
5.4.1 DELETION PROCEDURES (WITH MEMORISED
TRANSMITTER)
RAPID PROCEDURE (only for deleting ALL SETTINGS)
To do this ("Figure 13"):
1.
disconnect the power supply to the system. Wait 5 s. Power the
system again
2.
within 10 s from the power-up, press
LED strip will flash five times to confirm the deletion.
13
1
OFF
5 sec
NORMAL PROCEDURE
To do this ("Figure 14"):
3
1.
press PRG once on the transmitter. The paired LED strip will flash
twice
2.
press PRG once on the transmitter. The paired LED strip will flash
twice
3.
press PRG once on the transmitter. The paired LED strip will flash
x 2
three times
4.
press PRG once on the transmitter. The paired LED strip will flash
four times
5.
press the keys indicated in "Table 2" to select the desired option
among those available. At the end of the procedure, the paired LED
strip will flash three or five times to confirm the deletion.
14
1
End
PRG
3
End
PRG
DELETION
Buttons
p
x 3 s
p
q
+
x 3 s
o
x 3 s
PRG
2
(= 3s)
ON
=
2
(x 1)
PRG
x 2
4
(x 1)
(x 1)
PRG
x 3
Setting
Deletion of a SINGLE REMOTE CONTROL:
after selecting this option, press
remote control to be eliminated to complete the
procedure. The paired LED strip will flash five
times
Deletion of ALL SETTINGS
Deletion of ALL REMOTE CONTROLS
FULL deletion (reset to the system's factory
settings)
p
and
q
for 3 s. The paired
End
x 5
3
(x 1)
x 2
5
End
(... see
the table
and press
the keys)
x 4
Table 2
o
on the
ENGLISH – 7
Advertisement
Table of Contents
