Table of Contents
Advertisement
ENGLISH
Translation of the original instructions in full
CONTENTS
1
GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . 2
2
PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . . 3
2.1
List of constituent parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1
Pre-installation checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.2
Product usage limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.3
Product identification and overall dimensions . . . . . . . . . . . . . . . . . .3
3.4
Product installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1
Preliminary checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4.2
Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
5
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.1
TWO-WAY and ONE-WAY operation . . . . . . . . . . . . . . . . . . . . . . . . .4
5.2
Transmitter pairings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5.2.1 Memorising the FIRST TRANSMITTER . . . . . . . . . . . . . . . . . . . . .5
5.2.2 MEMORISING AN ADDITIONAL TRANSMITTER . . . . . . . . . . . . .5
5.3
LOCKING AND UNLOCKING THE MEMORY . . . . . . . . . . . . . . . . . .7
5.4
DELETION PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
5.4.1 DELETION procedures (with MEMORISED transmitter) . . . . . . . .7
ONE-WAY mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.4.4 Rotation speed of the RGB colours . . . . . . . . . . . . . . . . . . . . . . .9
6
COMMANDS FROM THE TRANSMITTER . . . . . . . . . . . . . . . 9
7
TESTING AND COMMISSIONING. . . . . . . . . . . . . . . . . . . . . . 9
8
PRODUCT MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . 10
9
PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . 10
10.1 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
10.2 Suggested power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
11 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 - ENGLISH
GENERAL SAFETY WARNINGS AND
1
PRECAUTIONS
1
GENERAL SAFETY WARNINGS AND PRECAUTIONS
a
WARNING! Important safety instructions. Observe all the
instructions as improper installation may cause serious
damages.
a
WARNING! Important safety instructions. It is important
to comply with these instructions to ensure personal
safety. Store these instructions carefully.
a
According to the latest European legislation, an automat-
ed device must be constructed in conformity to the har-
monised rules specified in the current Machinery Direc-
tive, which allow for declaring the presumed conformity
of the automation. Consequently, all the operations for
connecting the product to the mains electricity, its com-
missioning and maintenance must be carried out exclu-
sively by a qualified and expert technician.
a
In order to avoid any danger from inadvertent resetting
of the thermal cut-off device, this appliance must not be
powered through an external switching device, such as a
timer, or connected to a supply that is regularly powered
or switched off by the circuit.
WARNING! Please abide by the following warnings:
- Before commencing the installation, check the "Product techni-
cal specifications", in particular whether this product is suitable
for automating your guided part. Should it not be suitable, do
NOT proceed with the installation.
- The product cannot be used before it has been commissioned
as specified in the "Testing and commissioning" chapter.
- Before proceeding with the product's installation, check that all
the materials are in good working order and suited to the intend-
ed applications.
- The product is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capacities, nor
by anyone lacking sufficient experience or familiarity with the
product.
- Children must not play with the appliance.
- Do not allow children to play with the product's control devices.
Keep the remote controls out of reach of children.
- The system's power supply network must include a disconnec-
tion device (not supplied) with a contact opening gap permit-
ting complete disconnection under the conditions envisaged by
Overvoltage Category III.
- Handle the product with care during installation, taking care to
avoid crushing, denting or dropping it, or allowing contact with
liquids of any kind. Keep the product away from sources of heat
and naked flames. Failure to observe the above can damage the
product, and increase the risk of danger or malfunction. Should
this happen, stop installation immediately and contact Custom-
er Service.
- The manufacturer declines all liability for damages to property,
objects or people resulting from failure to observe the assem-
bly instructions. In such cases, the warranty for material defects
shall not apply.
Advertisement
Table of Contents
