Introduction
LED Behaviors
Regular operation
Solid Orange
Camera is on and booting up.
Flashing Orange
Camera is updating firmware.
Solid Blue
Camera is running, connected,
and recording data.
Network errors
The LED will flash in a specific order,
depending on the error state. You will
see 1 blue flash, followed by a number of
orange flashes.
1 Blue, 1 Orange
Camera is connected to the PoE, but
unable to connect to the Switch.
LED Behavior
1 Blue, 2 Orange
Camera has not received an IP address.
Solid Orange
Camera is on and booting up.
1 Blue, 3 Orange
Camera has detected duplicate IP
Flashing Orange
addresses on the LAN.
Camera is updating firmware.
1 Blue, 4 Orange
Flashing Blue
Camera is not able reach the router.
Camera is recording, but cannot reach the server.
Solid Blue
Camera is running, connected, and recording data.
4
–
Example of 1 Blue, 5 Orange flash sequence
1 Blue, 5 Orange
Camera is not able to resolve Verkada
hostnames.
1 Blue, 6 Orange
Camera is not able to receive a
response from the NTP Server.
1 Blue, 7 Orange
Camera is not able to certify the SSL
connection, likely due to SSL inspection.
1 Blue, 8 Orange
Verkada endpoints are not reachable
after boot up.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
Status LED
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.