Table of Contents
Advertisement
Introduction
LED Behaviors
Regular operation
Solid Orange
Camera is on and booting up.
Flashing Orange
Camera is updating firmware.
Solid Blue
Camera is running, connected,
and recording data.
Flashing Blue
Generic network error. Contact support.
Network errors
The LED will flash in a specific order,
depending on the error state. You will
see 1 blue flash, followed by a number of
orange flashes.
1 Blue, 1 Orange
Camera is connected with PoE, but
unable to connect to the Switch.
1 Blue, 2 Orange
Camera has not received an IP address.
1 Blue, 3 Orange
Camera is not able reach the
configured Gateway.
1 Blue, 4 Orange
Camera has detected duplicate IP
addresses on the LAN.
4
–
Example of 1 Blue, 5 Orange flash sequence
1 Blue, 5 Orange
Camera is not able to resolve Verkada
hostnames.
1 Blue, 6 Orange
Camera is not able to receive a
response from the NTP Server.
1 Blue, 7 Orange
Camera is not able to certify the SSL
connection, likely due to SSL inspection.
1 Blue, 8 Orange
Verkada endpoints are not reachable
after boot up.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
Status LED
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
Table of Contents
