Download Print this page

Omega OI63Z Installation, Operation And Maintenance Instructions

Advertisement

Quick Links

INSTALLATION, OPERATION
AND MAINTENANCE INSTRUCTIONS
Induction Cooktop
OI63Z

Advertisement

loading
Need help?

Need help?

Do you have a question about the OI63Z and is the answer not in the manual?

Questions and answers

Summary of Contents for Omega OI63Z

  • Page 1 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Induction Cooktop OI63Z...
  • Page 2 CONGRATULATIONS Welcome to the Omega Community and thank you for choosing one of our many fantastic cooking appliances. We are confident that you will now be able to meet your cooking needs. Before you use the cooktop we strongly recommend that you read though the whole user manual which provides the description of this product and the proper use of its functions.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Page 4 Total Power Induction 6200W SIZES: Relevant Sizes: LENGTH (mm) WIDTH (mm) HEIGHT (mm) Cooktop Size Due to continual product development, Omega reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.
  • Page 5 ELECTRICAL CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician, and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility. ELECTRICAL INSTALLATION Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the oven’s power rating (also indicated on the identification plate).
  • Page 6 INSTALLATION The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the ambient temperature of the room it is located in, during periods of use. The power supply to the appliance must be cut off before any adjustments or maintenance work is done on it. PREPARATION FOR INSTALLATION AND USE Manufactured with best quality parts and materials, this modern, functional and practical cooktop will meet your needs in all respects.
  • Page 7 INSTALLATION OF BUILT IN COOKTOP In order to prevent leakage of any liquids on the counter, a special sealing tape is supplied together with your cooktop. Apply this seal around the bottom edge of the cooktop (see below). The brackets are installed to hold the cooktop in place.
  • Page 8 OPERATING INSTRUCTIONS Cooking Surface Control Panel Timer Selection The induction cooktop appliance is operated by touching buttons, with the functions confirmed by LED displays and acoustic signals. Turning On and Turning Off the Cooktop Appliance NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel containing food on the appropriate cooking zone.
  • Page 9 Selecting A Cooking Zone Select a single cooking zone by pressing the corresponding Heater Selection Button and the Decimal Point of the chosen cooking zone flashes. For the selected cooking zone, you can set or adjust the heat level between 1-9 by touching the Increase Heat Setting Button (for the cooking zone in question) or Decrease Heat Setting Button .
  • Page 10 The Cooking Zone Timer Function The timer function can be set for individual cooking zones. First select a cooking zone and set the heat setting. While the decimal point is flashing, press the Timer Setting button . The timer display will show the current timer setting (flashing) for that cooking zone (00), with a separate indicator to the side representing the particular cooking zone.
  • Page 11 CLEANING NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The appliance should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use plastic, plastic coated or aluminium cooking equipment on this appliance.
  • Page 12 A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 IN AUSTRALIA: 1300 795 572 IN NEW ZEALAND: (09) 415 6000 www.omegaappliances.com.au IM Ref: OI63Z 12/2015/09FC FOR INDOOR USE ONLY...