Download Print this page

Troubleshooting; Technical Specifications; Warranty; Customer Assistance - Honeywell PLS731B Installation And User Manual

Programmable wall switch
Hide thumbs Also See for PLS731B:

Advertisement

Available languages

Available languages

Press the HOUR and MIN buttons to set the ON time (time when
you want the lights to turn on). If you have selected the 12-hour
format, ensure that PM appears on the screen when an
afternoon time is displayed.
After you have programmed the ON time, press the PGM button
to display the OFF time (time when you want the lights to turn
off).
Repeat steps 3 through 5 to program the OFF
time. If the program ON time is set for every day
of the week, the program OFF time will
automatically be set for every day.
To set another program, repeat steps 2 through 6. Programs that
are not set will remain inactive.
Press one of the control buttons or close the switch door to
return to normal operation.
Clearing a Program
Press the PGM button until the desired program is selected. Hold the
PGM button for 3 seconds. - : - - appears when the program is
erased.

Troubleshooting

Blank display
• Verify circuit breaker at main panel.
• Ensure the ON/OFF selector is at ON.
• Reset the switch using a paper clip.
Faded or irregular
Ambient temperature below freezing
display
point
Cannot switch between
First, press one of the control buttons so
24-hour format and
that MAN or AUTO appears on display.
12-hour format
Programs do not run
• Make sure the switch is properly pro-
as expected
grammed.
• Note that - : - - indicates an inactive pro-
gram, 00:00 indicates midnight.
• If the switch has been configured for
12-hour format, check that PM appears
on the left side of the screen when an
afternoon time is displayed.
The switch resets itself
The reset is caused by the load. Install a
without apparent rea-
snubber (AC130-03) at each relay/con-
son when used to con-
tactor.
trol an inductive load
such as a relay or a
contactor.

Technical Specifications

Supply: 120 VAC, 50 / 60 Hz
Maximum
load: 2400 watts resistive or inductive, 1 HP motor
Operating temperature
range: 5°F to 122°F (-15°C to 50°C)
Storage temperature
range: -4°F to 122°F (-20°C to 50°C)
Power
outage: The programs are protected by a rechargeable
battery. The screen is blank during the power outage.
Certifications: CSA & UL
PLS730B/PLS731B

Warranty

Honeywell warrants this product, excluding battery, to be free from
defects in the workmanship or materials, under normal use and ser-
vice, for a period of three (3) years from the date of purchase by the
consumer. If at any time during the warranty period the product is
determined to be defective or malfunctions, Honeywell shall repair or
replace it (at Honeywell's option).
If the product is defective,
(i)
return it, with a bill of sale or other dated proof of purchase, to
the place from which you purchased it, or
(ii) call Honeywell Customer Care at 1-800-468-1502. Customer
Care will make the determination whether the product should be
returned to the following address: Honeywell Return Goods,
Dock 4 MN10-3860, 1885 Douglas Dr N, Golden Valley, MN
55422, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This
warranty shall not apply if it is shown by Honeywell that the defect or
malfunction was caused by damage which occurred while the prod-
uct was in the possession of a consumer.
7.
Honeywell's sole responsibility shall be to repair or replace the prod-
uct within the terms stated above. HONEYWELL SHALL NOT BE
LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING,
DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR-
RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF
THIS PRODUCT. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so this limitation may not
apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEY-
WELL MAKES ON THIS PRODUCT. THE DURATION OF ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF
THIS WARRANTY. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to
you.
This warranty gives you specific legal rights, and you may have other
rights which vary from state to state.
If you have any questions concerning this warranty, please write Hon-
eywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN
55422 or call 1-800-468-1502. In Canada, write Retail Products
ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive,
Scarborough, Ontario M1V4Z9.

Customer Assistance

If you have any questions about your light switch, go to
8.
http://yourhome.honeywell.com, or call Honeywell Customer Care
toll-free at 1-800-468-1502.
9.
10.
2/6

Advertisement

loading

This manual is also suitable for:

Pls730b