Accessories; Factory Installed Equipment - Lincoln Electric 11779 Operator's Manual

C-1

FACTORY INSTALLED EQUIPMENT

• K1500-2 Gun Receiver Bushing.
DRIVE ROLL KITS (See Parts Pages)
K1803-1 Work and Feeder Cables Package.
K1840-xx Weld Power Cable, Twist-Mate to
K1842-xx Weld Power Cable, Lug to Lug.
K484
K2330-2
K2596-2

ACCESSORIES

Lug.
Jumper Plug Kit.
Timer Kit
Plastic Case
LN-25™ PIPE
Includes: Twist-Mate to Lug
2/0 cable 14' (1.2m) long with
Ground Clamp, and Twist-
Mate to Lug 2/0 Cable 9'
(2.7m) long.
Includes: Twist-Mate to Lug,
1/0 cable of length "xx".
Includes: Lug to Lug, 3/0
Cable of length "xx" for lengths
up to 60' (18.3m). Lug to Lug,
4/0 Cable of length "xx" for
lengths greater than 60'
(18.3m).
Includes: 14 pin circular con-
nector with jumper for leads 2-
4. For use in power sources
for turning the weld terminals
"ON" at all times.
Includes: Panel and harness
for adjusting preflow, burnback
and postflow times
Includes: a complete engi-
neered plastic case.
C-1