Table of Contents
Advertisement
Use and Maintenance Manual model "H10 V SHAPE - H12 V SHAPE"
10 FIRST START-UP INSTRUCTIONS
This chapter highlights a series of operations to carry
out during the first start-up phase of the appliance.
10.1 DATE AND TIME SETTING
The procedure follows to set the date and time, use-
ful for the thermostat with timer function, on the mod-
els of the manufacturer's range.
OPERATING PROCEDURE:
MENU >> SET USER >> SETTINGS >> TIME - DATE
Access the menu by pressing key
Scroll the items to SET USER with the key
Access the menu by pressing key
Scroll the items to SETTINGS with the key
Access the menu by pressing key
Scroll the items to TIME-DATE with the key
On the TIME - DATE menu item, key
The screen appears to adjust the time and calendar
as in the figure below.
Edit the data highlighted using the keys
Confirm the data changed using the key
Repeat the operation to complete the settings.
During editing, remember that:
• to return to the previous data, without saving
the last data changed, press the key
• if you intend changing a single datum, having ter-
minated the change, press the key
until you exit the function described in the paragraph.
To return to the STAND-BY screen, use the
key
, repeating the operation multiple times.
10.2 PROBE ADJUSTMENTS
The following procedure explains how to calibrate all
probes, should the value differ from the reading of a
reference standard thermostat.
OPERATING PROCEDURE:
MENU >> USER SETTINGS >> SETTINGS >> PROBE CALIBRATION
Access menu by pressing
Scroll down entries to select USER SETTINGS using
Access menu by pressing
OK
OK
OK
OK
OK
multiple times
OK
OK
OK
By pressing
, scroll down entries to select SETTINGS
Access the menu by pressing
Scroll down entries
Press
to access PROBE ADJUSTMENTS
OK
The probe adjustment screen will appear as in the
figure below.
Adjust the highlighted value by pressing
Example: the reference thermostat displays 21°C,
while the controller displays 19°C.
Set +2 to display 21°C on the controller.
Confirm your change by pressing
To go back to the STAND-BY screen, press
repeatedly.
10.3 ROOM TEMPERATURE SETTING
The ambient temperature defines the temperature
you want to obtain in the premises where the prod-
uct is installed.
From the STAND-BY screen, key
value;
The values vary from 7°C to MAN (with the MAN val-
ue it is intended that, once set, the appliance NEVER
goes to power save).
Edit the value with the keys
Confirm the new setting with the key
seconds for auto-confirm.
10.4 FIREPLACE POWER SETTING
The fireplace power defines the quantity of heat pro-
duced by the appliance, this implies
a different fuel consumption. Basically, it is used to
speed up the useful time to reach the
ideal temperature, set for the premises where the
product is installed.
From the STAND-BY screen, key
power;
The values vary from 1 to 7;
Edit the value with the keys
Confirm the new setting with the key
seconds for auto-confirm.
24
ENGLISH
OK
to select PROBE ADJUSTMENTS
OK
to select the
or wait 3
OK
to select the
OK
or wait 3
button
Advertisement
Table of Contents
