Nobis H10 V SHAPE Instructions For Installation, Use And Maintenance Manual page 11

Use and Maintenance Manual model "H10 V SHAPE - H12 V SHAPE"
3.9 COVERING ASSEMBLY
Remove the cast iron cover of the product,
remove the black upper side panel with a 8mm
hexagonal wrench and open the packaging
containing the covering.
Remove the pre-drilled blank from the sheet metal
with the assistance of a suitable tool.
LOWER SIDE MAJOLICA PANEL INSTALLATION
Take the lower right side majolica from the
packaging and position the plate, with the
centering holes, in the pins placed on the base of
the product. Bring the majolica to the vertical
position and fix the upper part with the screws,
previously removed, paying attention to align
correctly with the stove door.
ASSEMBLY OF THE UPPER SIDE PANEL
Remove the panel, previously disassembled, and
insert the pins located in the lower part of the panel,
into the holes on the previously fixed majolica
casing. Bring the panel into position and fix the up-
per part with the screws,previously removed, paying
attention to align correctly with the stove door.
Repeat both operations for mounting the opposite
side.
LOWER FRONT MAJOLICA ASSEMBLY
Open the door that hides the ash drawer and re-
move the lower front majolica and 4 screws (M5x12)
from the packaging. Position the majolica on the
external side of the door (holding it with your hand)
and using the 4 screws fix the majolica through the
pre-drilled holes.
11
ENGLISH