Hard Drive - HP 250 G1 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive cable or bracket. The hard drive cable
and bracket are included in the Hard Drive Hardware Kit.
Description
750-GB, 5400-rpm
640-GB, 5400-rpm
500-GB, 5400-rpm
320-GB, 5400-rpm
Hard Drive Hardware Kit (includes hard drive cable and bracket)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module/wireless module compartment cover (see
To remove the hard drive:
1. Loosen the hard drive cover screw (1), and then lift up (2) and remove the cover (3). The hard drive
compartment cover is available in the Plastics Kit. For more information about the Plastics Kit, see
Plastics kit on page
2. Disconnect the hard drive cable (1) from the system board.
ENWW
Battery on page 36).
23.
Spare part number
634250-001
669300-001
669299-001
622643-001
685089-001
WLAN module on page
Component replacement procedures
45).
49