Setting Jumpers On The Motherboard - ABB TZIDC-220 Operating Instructions Manual
Electro-pneumatic positioner for foundation fieldbus with flameproof enclosure
Hide thumbs
Also See for TZIDC-220:
- Operating instructions manual (68 pages) ,
- Operating instruction (68 pages) ,
- Commissioning instructions (34 pages)
Table of Contents
Advertisement
3.4 Setting jumpers on the motherboard
Two jumpers can be set on the motherboard to enable/disable simulation or write
access. Set the jumpers according to your needs as seen in the illustration below:
Default setting (acc. to FIELDBUS Foundation standard):
Fig. 21
Jumper setting
42/18-82 EN
Disabled
Enabled
Simulation disabled
Write-access enabled
Electro-pneumatic positioner TZIDC-220
Simulation
Write-access
25
Advertisement
Table of Contents
