Correct Use; Qualified Personnel; Manufacturer's Information; Delivery - ABB TZIDC-220 Operating Instructions Manual

1.4 Correct use

The TZIDC-220 positioner is an electro-pneumatic positioner with flameproof enclosure
for pneumatic final control elements. It is designed for being attached to linear and rotary
actuators following the instructions in this manual. The positioner may be used only for
the applications listed in these operating instructions or in the data sheet 18-0.34 EN.
Any other use is considered as incorrect.
The signal current circuit and the input and output circuitry must meet the explosion pro-
tection requirements stipulated in the certificates (see chapter "Certificates" starting on
page 40).
The maximum permissible ambient temperature range of -40 °C to +85 °C (when using
proximity switches of type SJ2-S1N (NO): -25 °C to + 85 °C) must not be exceeded.

1.5 Qualified personnel

Only those persons familiar with the installation, commissioning, operation and mainte-
nance of the TZIDC-220 positioner or similar instruments who have the required qualifi-
cation and have read and understood the operating instructions are authorized to work
on the TZIDC-220 positioner. These persons must be sufficiently trained and experi-
enced and know the relevant standards and regulations to be able to judge their
assigned tasks and recognize potential hazards. Only persons who are qualified or have
been trained adequately and who have the required certificates are authorized to work
on explosion-protected devices.
2

Manufacturer's information

2.1 Delivery

When receiving the delivery please immediately check items and scope for intactness
and completeness. The scope of delivery is stated in the shipping documents. If ordered,
the accessories (e.g. mounting material, pressure gauge block, filter regulator) are
added to the delivery as individual items. Check items and scope of the delivery by
means of the catalog numbers to see if types and quantities are in accordance with your
order. If the positioner is delivered already mounted to the actuator, the positioner,
accessories and actuator or final control element are considered as a common delivery
item. A list of catalog numbers and details of the different versions and accessories can
be found in data sheet 18-0.34 EN.

2.2 CE compliance information

We declare that we are the manufacturer of the TZIDC-220 positioner and that the prod-
uct conforms with the EMC Directive 89/336/CEE as of May 1989 and meets the require-
ments of the following standards:
• EN 55022:1998 "Information technology equipment, Radio disturbance
characteristics, Limits and methods of measurement"
• EN 61000-6-2:8/2002 "Electromagnetic compatibility (EMC)
Part 6-2: Generic standards - Immunity for industrial environments
• EN 61000-6-3:3/2000 "Electromagnetic compatibility (EMC)
Part 6-3: Generic standards - Emission standard for residential, commercial and
light-industrial environments
The TZIDC-220 positioner complies with the EC directive for CE conformity certification.
10 Electro-pneumatic positioner TZIDC-220 42/18-82 EN