Connector Ports - Planar Dome E2 User Manual

Connector Ports

The video signal connector is a standard DVI connector.
The Dome E2 display uses a 4-pin DIN connector. The power input is
12V ±5% (80 W).
The Dome E3, Dome E3c, and Dome E5 displays use a 8-pin DIN
connector. The power input is 12V ±5% (120 W).
Details of DIN connectors
VCC 1
GND 3
VCC 8
VCC 7
VCC 6
VCC 5
2 GND
4 VCC
1 GND
2 GND
3 GND
4 GND
Location of power port on
back of display
4-pin connector on
Dome E2 displays
8-pin connector on
Dome E3, Dome E3c, and
Dome E5 displays
Connector Ports | 25