Table of Contents
Advertisement
Messages
ADVISORY
<Name> log
encountered an
error when
exporting.
<Name> log has
exported
successfully.
Heading source
inoperative or
connection lost.
Pressure altitude
source inoperative
or connection lost.
Press "Enable APR
Output" before
selecting APR on
autopilot.
ADS-B Out fault.
Pressure altitude
source inoperative
or connection lost.
6-12
CONDITION
Export failure. May occur
for WAAS or traffic logs.
Export to SD card
successful. May occur for
WAAS or traffic logs.
<Unit> is not receiving
heading information
from any source.
Heading up map
orientation not available.
<Unit> is not receiving
pressure altitude data
from any source.
Approach guidance is
available from the
connected
KAP 140/KFC 225
autopilot.
For GNX 375, or
GPS 175/GNC 355
configured to receive
ADS-B In data from
GTX 345:
Transponder loses
communication with the
pressure altitude source.
Pilot's Guide
CORRECTIVE ACTION
1. Reformat the SD card
using an external
computer.
2. Re-insert the SD card in
the slot.
3. Contact dealer if the
problem persists.
No action necessary.
Contact dealer for service.
For installations not
connected to a pressure
altitude source, this message
may be turned off via the
Altitude Source Input
configuration setting.
Contact dealer to update this
setting if preferred.
This option is available only
on GPS 175 and GNC 355
units with Main software
version 3.10 and later.
Before engaging approach
mode on the autopilot, tap
the Enable APR Output key.
Contact dealer for service.
190-02488-01 Rev. B
Hide quick links:
Advertisement
Table of Contents
