Table of Contents
Advertisement
Navigation
Delete any existing flight plan before attempting to graphically edit a direct-to
waypoint. Map does not allow the addition of an intermediate waypoint
between the current position and a direct-to waypoint unless the waypoint is in
the flight plan.
3-18
GPS 175 & GNX 375:
Active route identifiers also appear on the GPS NAV Status
indicator key in the lower right corner of the display.
GNC 355/355A:
If configured, a user field shows active route identifiers on
Map.
Pilot's Guide
3. Tap and drag the leg to a new
waypoint or airway, then
release.
The temporary flight plan adjusts
to show the new route.
If no other edits are necessary,
tap Done.
The new waypoint now appears in
the active flight plan.
190-02488-01 Rev. B
Hide quick links:
Advertisement
Table of Contents
