Traffic Setup - Garmin GNC 355 Pilot's Manual

Traffic Setup

Traffic Menu
ADS‐B Display
[1]
Test
Motion Vector
Absolute
Relative
Off
Vector Duration
Set duration
Altitude Filter
Normal
Above
Below
Unrestricted
Traffic Grouping
ADS-B Display
Test
Motion Vector
Vector Duration
Altitude Filter
Traffic Grouping
[1] Available only when aircraft is on ground (i.e., standby mode) and ADS-B Display is off.
190-02488-01 Rev. B
Tap Menu to access pilot selectable
settings as well as the self-test and ADS-B
display functions.
Map Traffic Overlay
The overlay control resides in the
Home > Map > Menu > Select
Enable AIRB/ATAS. Depending on the state of the aircraft,
the system may additionally select SURF.
Selecting Off disables the ADS-B In function.
Initiate a test of the traffic system. A test pattern displays on
the page. System returns to normal operating mode once
the test is complete.
Select motion vector type. Selecting Off removes all motion
vectors from the display.
Options: • Absolute • Relative • Off
Select the amount of time represented by the endpoint.
Options range from 30 seconds to 5 minutes.
A longer duration results in a longer vector.
Select filter range.
Options: • Normal • Above • Below • Unrestricted
Show targets in close proximity as a group. When active, the
highest priority target is displayed. Asterisk indicates one or
more targets are decluttered by grouping.
Pilot's Guide
Map setup menu.
Traffic.
[1]
Hazard Awareness
5-29