Garmin GNC 355 Pilot's Manual page 180

Navigation
NON-REQUIRED HOLDING PATTERNS
Timer/Distance field displays on the active flight plan (refer here when flying the
outbound portion of the holding pattern). Holding pattern appears on Map with the
active flight plan leg indication.
CROSSING MISSED APPROACH POINT
When crossing the missed approach point:
•
"SUSP" annunciation indicates that approach waypoint sequencing is
suspended at the missed approach point
•
FROM/TO flag on the CDI indicates "From" for non-composite CDIs
•
FROM/TO field on the annunciator bar indicates "FR"
•
Course guidance continues along the final approach course
If you need to go around the holding pattern again to lose extra altitude or
speed, tap SUSP to manually suspend waypoint sequencing before crossing the
holding waypoint the second time.
If you have already passed the waypoint, re-activate the holding pattern.
3-78
Upon activating an RNP GPS
approach, decide whether to skip
non-required holding patterns during
the initial transitions of the approach.
A pop-up presents two options.
Selecting Yes adds the hold to the
flight plan.
Preview shows the hold in white.
Selecting No means the hold is not
included in the flight plan.
Preview shows the hold in gray.
Pilot's Guide 190-02488-01 Rev. B