Eaton Power Defense 32-NF Instruction Leaflet page 7

3-way multi-family drawout cable interlock kit - type 32 - NF
Upper
nut
Compression
spring
38,1 mm (1,5 in)
cable tube spacer
Threaded (drive)
end (short rod)
Lower nuts
(should be shouldered
against end of thread)
Rubber boot
Outer bulkhead nut
Lock washers (2)
Bulkhead nut
Drive end cable brackets
Figure 11. Details for Step 6: cable assembly drive (short rod) end mounting component identification, mounting cable assembly in
cable bracket, and cable rod attachment to drive arm
Compression
Swivel fitting
Lower nuts
Stop at end of thread
Slide smaller diameter
portion of bulkhead
Raise cable assembly
until threaded portion
of bulkhead fitting
enters slotted hole in
cable bracket (threads
show above bracket).
Instruction Leaflet IL0131080EN
Upper nut (tighten
against tube spacer)
spring
Drive lever
fitting into cable
bracket slot.
Lock
washers
EATON www.eaton.com
Effective January 2019
Upper nut (tighten
against tube spacer)
Swivel
fitting
Compression
spring
Lower nuts
7