Assembly; Installing The Puricare Filters - LG AP300A Series Owner's Manual

Wearable air purifier

Hide thumbs Also See for AP300A Series:

Table of Contents

ASSEMBLY

Filter case

Separate the filter cases from the product.

• Pull the filter cases at the spots marked in Figure 1 above to separate the

cases from the product.

Insert the PuriCare Filters into the filter cases with the arrow on the

PuriCare Filters facing up.

Align the filter cases with the grooves at the front of the product and

press the cases in until they click into place.

• Make sure to align the filter cases correctly before reassembling. The LG

PuriCare logo is on the right filter case.

NOTE

• Do not press the center of the PuriCare Filters too hard when installing the

filter. Doing so may lead to the filter blocking the air inlet.

• Pay attention to the direction indicated by the arrow on the filter when install-

ing the PuriCare Filter. Otherwise, product performance may be degraded.

– The horizontal or vertical direction of the PuriCare Filter does not affect

product performance.

• Ensure the product is turned off before replacing the filter.

• Make sure that the PuriCare Filters are installed before using the product. Do not

use the product without the filters in place.

Left

filter case

Right

filter case

Table of Contents

Ap300awfa