Installing Raid Driver - MSI MEG B550 UNIFY Quick Start Manual

Installing RAID Driver

New Operating System Installation
The following details the installation of the drivers while installing operating system.
1. During the operating system installation, after selecting the location to install
Windows click on Load driver button to install a third party RAID driver.
2. When prompted, insert the USB flash drive with AMD RAID Drivers and then click
Browse.
▪ To make an AMD RAID Drivers USB flash drive. Insert the MSI Driver Disc into
the optical drive. Copy all the contents in \\Storage\AMD\
3. Navigate to the rcbottom folder, then click OK.
4. Select the (rcbottom.inf) driver, click Next.
5. Click Browse and navigate to the rcraid folder, then click OK.
6. Select the (rcraid.inf) driver, click Next.
7. You have successfully installed the RAID driver, and Windows setup should
continue.
8. Leave the disk/ USB drive in the computer until the system reboots itself.
Windows setup will need to copy the files after the RAID volume is formatted, and
Windows setup starts copying files.
AMD RAIDXpert2 Management Suite Installation
1. Set the SATA Mode to RAID Mode in BIOS
2. Insert the MSI Driver Disc into the optical drive.
3. Click the Select to choose what happens with this disc pop-up notification, then
select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature
from the Windows Control Panel, you can still manually execute the DVDSetup.
exe from the root path of the MSI Driver Disc.
4. Under the Drivers/Software tab, check the AMD RAID Drivers check-box.
5. Click the Install button.
6. When prompt you to restart, click OK button to finish.
7. Restart your computer and enter the Windows operating system.
8. Double-click the RAIDXpert2 icon to open the RAIDXpert2 Web GUI.
▪ Default credentials are:
▫ Username - admin
▫ Password - admin
9. Change the credentials:
▪ Create new username and password
10. Re-log into the RAIDXpert2 Web GUI with the new credentials.
AMD RAID Configuration
77