MSI MEG X570S ACE MAX Quick Start Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Motherboard
  5. MEG X570S ACE MAX
  6. Quick start manual

MSI MEG X570S ACE MAX Quick Start Manual

Hide thumbs Also See for MEG X570S ACE MAX:
Table of Contents

Advertisement

Quick Links

Quick Start

Thank you for purchasing the MSI®
MEG X570S ACE MAX
motherboard. This Quick
Start section provides demonstration diagrams about how to install your computer.
Some of the installations also provide video demonstrations. Please link to the URL to
watch it with the web browser on your phone or tablet. You may have even link to the
URL by scanning the QR code.

Preparing Tools and Components

AMD
AM4 CPU
®
CPU Fan
Chassis
DDR4 Memory
Power Supply Unit
Graphics Card
Thermal Paste
SATA Hard Disk Drive
SATA DVD Drive
A Package of Screws
Phillips Screwdriver
1
Quick Start

Advertisement

Table of Contents
loading

Related Manuals for MSI MEG X570S ACE MAX

Summary of Contents for MSI MEG X570S ACE MAX

  • Page 1: Quick Start

    Quick Start Thank you for purchasing the MSI® MEG X570S ACE MAX motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet.

  • Page 2: Safety Information

    Safety Information ∙ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ∙ Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

  • Page 3: Case Stand-Off Notification

    Case stand-off notification To prevent damage to the motherboard, any unnecessary mounting stand-off between the motherboard circuits and the computer case is prohibited. The Case standoff keep out zone signs will be marked on the backside of motherboard (as shown below) to serve as a warning to user.

  • Page 4: Installing A Processor

    Installing a Processor https://youtu.be/Xv89nhFk1vc Quick Start...
  • Page 5 ⚠ Important If you are installing the screw-type CPU heatsink, please follow the figure below to remove the retention module first and then install the heatsink. Quick Start...

  • Page 6: Installing Ddr4 Memory

    Installing DDR4 memory ⚽ http://youtu.be/T03aDrJPyQs DIMMA1 DIMMA2 DIMMA2 DIMMA2 DIMMB1 DIMMB2 DIMMB2 Quick Start...

  • Page 7: Connecting The Front Panel Header

    Connecting the Front Panel Header ⚽ http://youtu.be/DPELIdVNZUI Power LED Power Switch JFP1 Reserved HDD LED Reset Switch HDD LED + Power LED + HDD LED - Power LED - Reset Switch Power Switch JFP1 Reset Switch Power Switch Reserved No Pin HDD LED - HDD LED HDD LED +...

  • Page 8: Installing The Motherboard

    Installing the Motherboard ⚽ https://youtu.be/wWI6Qt51Wnc Torque: 3 kgf·cm* BAT1 *3 kgf·cm = 0.3 N·m = 2.6 lbf·in Quick Start...

  • Page 9: Connecting The Power Connectors

    Connecting the Power Connectors ⚽ http://youtu.be/gkDYyR_83I4 ATX_PWR1 CPU_PWR2 CPU_PWR1 Quick Start...

  • Page 10: Installing Sata Drives

    Installing SATA Drives ⚽ http://youtu.be/RZsMpqxythc Quick Start...

  • Page 11: Installing A Graphics Card

    Installing a Graphics Card ⚽ http://youtu.be/mG0GZpr9w_A Quick Start...

  • Page 12: Connecting Peripheral Devices

    Connecting Peripheral Devices Quick Start...

  • Page 13: Power On

    Power On Quick Start...

  • Page 14: Table Of Contents

    Contents Quick Start ......................1 Preparing Tools and Components................1 Safety Information ....................2 Case stand-off notification ..................3 Avoid collision notification ..................3 Installing a Processor .................... 4 Installing DDR4 memory ..................6 Connecting the Front Panel Header ..............7 Installing the Motherboard ..................
  • Page 15 Hexadecimal Character Table ................55 Boot Phases ......................55 Debug Code LED Table ..................55 ACPI States Codes ....................59 Installing OS, Drivers & MSI Center ..............60 Installing Windows® 10 ..................60 Installing Drivers ....................60 MSI Center ......................60 UEFI BIOS ......................
  • Page 16 Audio Tab ......................65 Microphone Tab ....................66 Sound Tracker Tab ....................67 Settings Tab ......................67 RAID Configuration ....................68 Troubleshooting ....................69 Contents...

  • Page 17: Specifications

    ∙ Supports AMD Ryzen™ 5000 Series, 5000 G-Series 4000 G-Series, 3000 Series, 3000 G-Series, 2000 Series and 2000 G-Series desktop processors* ∙ Supports Socket AM4 * Please go to msi.com to get the newest support status as new processors are released. Chipset AMD X570 Chipset ∙...
  • Page 18 Continued from previous page ∙ Supports PCIe 4.0 / PCIe 3.0 ▪ PCIe 4.0 is available only on AMD Ryzen™ 5000 Series and 3000 Series desktop processors ∙ 2x PCIe x16 slots (From processor) ▪ PCI_E1 & PCI_E2 support x16/ x0, X8/ X8 for AMD Ryzen™...
  • Page 19 Continued from previous page ∙ 8x SATA 6Gb/s ports (From X570 chipset)* ∙ 4x M.2 slots (Key M)* ▪ Supports PCIe 4.0 / PCIe 3.0 ▫ PCIe 4.0 is available only on AMD Ryzen™ 5000 Series and 3000 Series desktop processors ▪...
  • Page 20 Continued from previous page ∙ 1x Clear CMOS Button ∙ 1x Flash BIOS Button ∙ 4x USB 2.0 ports ∙ 4x USB 3.2 Gen 1 5Gbps Type-A ports ∙ 1x LAN(RJ45) port Back Panel Connectors ∙ 3x USB 3.2 Gen 2 10Gbps Type-A ports ∙...
  • Page 21 ∙ ACPI 6.2, SM BIOS 3.0 ∙ Multi-language ∙ Drivers ∙ MSI Center ∙ Nahimic ∙ MSI APP Player (Bluestack) Software ∙ Open Broadcaster Software (OBS) ∙ CPU-Z MSI GAMING ∙ Google Chrome™, Google Toolbar, Google Drive ∙ Norton™ Internet Security Solution...
  • Page 22 ∙ Mystic Light ∙ Ambient Link ∙ Frozr AI Cooling MSI Center Features ∙ User Scenario ∙ True Color ∙ Live Update ∙ Monitor ∙ Super Charger ∙ Speed Up ∙ Smart Image Finder ∙ MSI Companion Continued on next page Specifications...
  • Page 23 Continued from previous page ∙ Audio ▪ Audio Boost 5 HD ▪ Nahimic 3 ∙ Network ▪ 2.5G LAN ▪ LAN Manager ▪ Intel WiFi ∙ Cooling ▪ All Aluminum Design ▪ Mosfet Baseplate ▪ M.2 Shield Frozr ▪ K7 thermal pad ▪...

  • Page 24: Jcorsair1 Connector Specification

    Special Features ▪ Front USB Type-C ▪ Dual CPU Power ▪ Server PCB ▪ 2oz Copper thickened PCB ∙ Experience ▪ MSI Center ▪ Duet Display ▪ Frozr AI Cooling ▪ Click BIOS 5 ▪ System Saver ▪ Flash BIOS Button...

  • Page 25: Package Contents

    Package contents Please check the contents of your motherboard package. It should contain: Motherboard MEG X570S ACE MAX User Manual Documentation Quick Installation Guide Application USB drive with drivers & utilities SATA 6Gb/s Cables LED JRGB Y Cable Cable LED JCORSAIR Cable...

  • Page 26: Block Diagram

    Block Diagram PCI_E1 DDR4 2Channel (Max. x16) DIMM A1,A2 DIMM B1,B2 Switch PCI_E2 USB 3.2 Gen 2 10Gbps (Max. x8) M2_1 PCIE x4 M2_2 Chipset USB 3.2 Gen 2 10Gbps M2_3 Switch USB 3.2 Gen 1 5Gbps PCI_E4 (Max. x8) USB 3.2 Gen 1 5Gbps Switch M2_4...

  • Page 27: Rear I/O Panel

    Rear I/O Panel Wi-Fi Antenna Audio Ports USB 3.2 Gen 1 connectors Clear CMOS 2.5 Gbps 5Gbps Type-A button Optical S/PDIF-Out Flash BIOS Flash BIOS Port Button USB 2.0 USB 3.2 Gen 2 USB 3.2 Gen 2x2 10Gbps Type-A 20Gbps Type-C ∙...

  • Page 28: Realtek Audio Console

    Realtek Audio Console After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience. Application Enhancement Device Selection Main Volume Connector Settings Jack Status ∙ Device Selection - allows you to select a audio output source to change the related options.
  • Page 29 Audio jacks to headphone and microphone diagram Audio jacks to stereo speakers diagram AUDIO INPUT Audio jacks to 7.1-channel speakers diagram AUDIO INPUT Rear Front Side Center/ Subwoofer Rear I/O Panel...

  • Page 30: Installing Antennas

    Installing Antennas 1. Combine the antenna with the base. 2. Screw two antenna cables tight to the WiFi antenna connectors as shown. 3. Place the antenna as high as possible. Rear I/O Panel...

  • Page 31: Overview Of Components

    Overview of Components Processor Socket CPU_FAN1 PUMP_FAN1 CPU_PWR2 SYS_FAN1 CPU_PWR1 SYS_FAN2 JSMB1 JRAINBOW1 JCORSAIR1 DIMMB2 DIMMB1 ATX_PWR1 DIMMA2 JUSB1 SYS_FAN6 DIMMA1 JTPM1 M2_1 JUSB2 PCI_E1 JLN1 M2_2 BAT1 SATA▼1▲2 SATA▼3▲4 M2_3 PCI_E2 SATA▼5▲6 M2_4 JPWRLED1 PCI_E3 SATA▼7▲8 JBAT1 LED_SW1 JDASH1 JRAINBOW2 PCI_E4 JFP2...
  • Page 32 Component Contents Port Name Port Type Page CPU_FAN1, PUMP_FAN1, Fan Connectors SYS_FAN1~6 CPU_PWR1~2, ATX_PWR1 Power Connectors DIMMA1, DIMMA2, DIMMB1, DIMM Slots DIMMB2 JAUD1 Front Audio Connector JBAT1 Clear CMOS Jumper JCI1 Chassis Intrusion Connector JCORSAIR1 CORSAIR Connector JDASH1 Tuning Controller connector JFP1, JFP2 Front Panel Connectors JLN1...

  • Page 33: Processor Socket

    Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications. Overview of Components...

  • Page 34: Dimm Slots

    ∙ Due to AM4 processor/ memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory. Overview of Components...

  • Page 35: Pci_E1~4: Pcie Expansion Slots

    PCIe 3.0 x8 PCIe 3.0 x8 ⚠ Important If you install a large and heavy graphics card, you need to use a tool such as MSI ∙ Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.

  • Page 36: Bandwidth Share Table

    AMD Ryzen™ 2000 G-Series and 3000 G-Series desktop processors Slot Single VGA 2-Way VGA PCI_E1 (CPU) @ x8 @ x8 PCI_E2 (CPU) — — PCI_E3 (Chipset) PCI_E4 (Chipset) x8/ x4 @x8/ @x4* (─: unavailable, @: graphics card, *: CrossFire only) ⚠...
  • Page 37 Installing SLI graphics cards For power supply recommendations for SLI configurations, please refer to the user guide of your graphics card to make sure you meet all the system requirements. To install SLI graphics cards: 1. Turn off your computer and disconnect the power cord, install two graphics cards into the PCI_E1 &...

  • Page 38: M2_1~4: M.2 Slots (Key M)

    M2_1~4: M.2 Slots (Key M) ⚽ M2_1 (CPU) Video Demonstration Watch the video to learn how to Install M2_2 (Chipset) M.2 SSD. M2_3 (Chipset) https://youtu.be/2UeWMgjwogU M2_4 (Chipset) Installing M.2 module 1. Loosen the screws of M.2 SHIELD FROZR heatsink. 2. Remove the M.2 SHIELD FROZR and remove the protective films from the thermal pads.
  • Page 39 3. Secure the supplied M.2 standoff according to your M.2 SSD length if need. 4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle. 5. Secure the M.2 SSD in place with the supplied M.2 8.5H screw. ⚠...

  • Page 40: Installing M.2 Xpander-Z Gen4 S Card

    Installing M.2 XPANDER-Z Gen4 S card To install the M.2 XPANDER-Z GEN 4 S card, please follows the steps below. 1. Remove the heatsink by loosening four screws on the back of the card. 2. Loosen M.2 screw from M.2 standoff. 3.
  • Page 41 9. Insert the card into the PCI_E2 slot. 10. Use a screw to secure the card. PCI_E2 11. Connect the PCIE_PWR1 to the power supply. 12. Connect the case’s HDD LED cable to the JCASE connector. 13. Using the supplied HDD LED cable to connect the JMB connector and JFP1’s HDD pins (pin 1 &...

  • Page 42: Sata1~8: Sata 6Gb/S Connectors

    SATA1~8: SATA 6Gb/s Connectors These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. SATA2 SATA1 SATA4 SATA3 SATA6 SATA5 SATA8 SATA7 ⚠ Important Please do not fold the SATA cable at a 90-degree angle. Data loss may result during ∙...

  • Page 43: Cpu_Pwr1~2, Atx_Pwr1: Power Connectors

    CPU_PWR1~2, ATX_PWR1: Power Connectors These connectors allow you to connect an ATX power supply. CPU_PWR1~2 Ground +12V Ground +12V Ground +12V Ground +12V +3.3V +3.3V +3.3V -12V Ground Ground PS-ON# Ground Ground Ground ATX_PWR1 Ground Ground PWR OK 5VSB +12V +12V +3.3V Ground...

  • Page 44: Joc_Fs1: Safe Boot Jumper

    JOC_FS1: Safe Boot Jumper This jumper is used for Safe Boot. Once enabled, the system will boot with lower PCIe (from CPU) mode. Normal Boot Enabled (default) Boot with lower PCIe (from CPU) mode for Safe Boot. T_SEN1~2: Thermal Sensor Connectors These connectors allow you to connect the thermistor cable and use it to monitor the temperature of the detection point.

  • Page 45: Jln1: Low Temperature Booting Jumper

    JLN1: Low Temperature Booting Jumper This jumper is used for liquid nitrogen cooling system to boot at an extreme low temperature. Try to set it Enabled to increase the boot success rate. Enabled Normal (Please enable this jumper (Default) during BIOS POST.) ⚠...

  • Page 46: Jusb1: Usb 3.2 Gen 2 Type-C Connector

    JUSB1: USB 3.2 Gen 2 Type-C Connector This connector allows you to connect USB 3.2 Gen 2 Type-C connector on the front panel. The connector possesses a foolproof design. When you connect the cable, be sure to connect it with the corresponding orientation. USB Type-C Cable JUSB1 USB Type-C port on...

  • Page 47: Jusb4~5: Usb 2.0 Connectors

    In order to recharge your iPad,iPhone and iPod through USB ports, please install ∙ MSI® Center utility. JTPM1: TPM Module Connector This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

  • Page 48: Cpu_Fan1, Pump_Fan1, Sys_Fan1~6: Fan Connectors

    CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. The auto mode fan connectors can automatically detect PWM and DC mode.

  • Page 49: Jci1: Chassis Intrusion Connector

    JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable. Normal Trigger the chassis (default) intrusion event Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2.

  • Page 50: Jbat1: Clear Cmos (Reset Bios) Jumper

    JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory. Keep Data Clear CMOS/ (default)

  • Page 51: Jrgb1: Rgb Led Connector

    (12V/G/R/B) with the maximum power rating of 3A (12V). Always turn off the power supply and unplug the power cord from the power outlet ∙ before installing or removing the RGB LED strip. Please use MSI’s software to control the extended LED strip. ∙ Overview of Components...

  • Page 52: Jrainbow1~2: Addressable Rgb Led Connectors

    (5V). In the case of 20% brightness, the connector supports up to 200 LEDs. ∙ Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip. ∙ Please use MSI’s software to control the extended LED strip. Overview of Components...

  • Page 53: Jcorsair1: Corsair Connector

    The JCORSAIR1 connector allows you to connect the CORSAIR Individually Addressable Lighting PRO RGB LED strips 5V or CORSAIR RGB fans with the CORSAIR fan hub. Once all items are connected properly, you can control the CORSAIR RGB LED strips and fans with MSI's software. Data Ground...

  • Page 54: Onboard Leds

    Onboard LEDs EZ Debug LED These LEDs indicate the debug status of the motherboard. CPU - indicates CPU is not detected or fail. DRAM - indicates DRAM is not detected or fail. VGA - indicates GPU is not detected or fail. BOOT - indicates the booting device is not detected or fail.

  • Page 55: Debug Code Led

    Debug Code LED The Debug Code LED displays progress and error codes during and after POST. Refer to the Debug Code LED table for details. Debug Code LED Hexadecimal Character Table Hexadecimal Debug Code 0 1 2 3 4 5 6 7 8 9 A B C D E F LED display Boot Phases Security (SEC) –...
  • Page 56 SEC Error Codes 0C - 0D Reserved for future AMI SEC error codes Microcode not found Microcode not loaded PEI Progress Codes PEI Core is started Pre-memory CPU initialization is started 12 - 14 Pre-memory CPU initialization (CPU module specific) Pre-memory System Agent initialization is started 16 - 18 Pre-Memory System Agent initialization (System Agent module specific)
  • Page 57 PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started 6B - 6F System Agent DXE initialization (System Agent module specific) PCH DXE initialization is started PCH DXE SMM initialization is started PCH devices initialization 73 - 77 PCH DXE Initialization (PCH module specific) ACPI module initialization...
  • Page 58 Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) B8 - BF Reserved for future AMI codes DXE Error Codes CPU initialization error System Agent initialization error...

  • Page 59: Acpi States Codes

    Recovery Progress Codes Recovery condition triggered by firmware (Auto recovery) Recovery condition triggered by user (Forced recovery) Recovery process started Recovery firmware image is found Recovery firmware image is loaded F5 - F7 Reserved for future AMI progress codes Recovery Error Codes Recovery PPI is not available Recovery capsule is not found Invalid recovery capsule...

  • Page 60: Installing Os, Drivers & Msi Center

    MSI Center is an application that helps you easily optimize game settings and smoothly use content creation softwares. It also allows you to control and synchronize LED light effects on PCs and other MSI products. With MSI Center, you can customize ideal modes, monitor system performance, and adjust fan speed.

  • Page 61: Uefi Bios

    UEFI has many new functions and advantages that traditional BIOS cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s capabilities.

  • Page 62: Bios Setup

    * When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice. BIOS User Guide If you’d like to know more instructions on setting up the BIOS, please refer to http://download.msi.com/manual/mb/AMDX570BIOS.pdf or scan the QR code to access. BIOS Setup...

  • Page 63: Resetting Bios

    Updating BIOS Updating BIOS with M-FLASH Before updating: Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive. Updating BIOS: 1. Switch to the target BIOS ROM by Multi-BIOS switch. If your motherboard does not has this switch , please skip this step.
  • Page 64 1. Please download the latest BIOS file that matches your motherboard model from the MSI® website. 2. Rename the BIOS file to MSI.ROM, and save it to the root of the USB 2.0 storage device. 3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to install CPU and memory.)

  • Page 65: Nahimic 3

    Sound Tracker. Installation and Update Nahimic 3 is included in the audio driver. If you need to install it or update it, please use the Driver Disc with your motherboard or download the driver from MSI’s official website. Audio Tab From this tab, you can access all of Nahimic 3’s audio effects, audio profiles and...

  • Page 66: Microphone Tab

    ▪ Voices - it boosts (or removes) the speech in movies, video games and incoming communication from -12 to +12 dB. ▪ Bass - increases (or decreases) the energy in low frequencies from -12 to +12 ▪ Treble - increases (or decreases) the energy in high frequencies from -12 to +12 ∙...

  • Page 67: Sound Tracker Tab

    Sound Tracker Tab The Sound Tracker is an FPS oriented feature that provides a visual indication localizing the sources of the sounds while in a game. These are represented by dynamic segments pointing the direction of the sounds: the more opaque they are, the stronger the sounds are.

  • Page 68: Raid Configuration

    All the information/ volumes/ pictures listed in your system might differ from the illustrations in this appendix. AMD RAID User Guide If you’d like to know more instructions on how to set up AMD RAID, please refer to http://download.msi.com/manual/mb/AMDRAID.pdf or scan the QR code to access. RAID Configuration...

  • Page 69: Troubleshooting

    Troubleshooting Lost BIOS password Before sending the motherboard for RMA repair, try to go over troubleshooting ∙ Clear the CMOS, but that will cause guide first to see if your got similar you to lose all customized settings in the symptoms as mentioned below.
  • Page 70 NOTE Troubleshooting...
  • Page 71 European Harmonized Standards. disposing of their end-of-life products. The point of contact for regulatory matters is MSI, y Visit the MSI website and locate a nearby distributor MSI-NL Eindhoven 5706 5692 ER Son. for further recycling information. KC인증서...
  • Page 72 Unión Europea al final de su periodo de vida. Usted their useful life. MSI will comply with the product take debe depositar estos productos en el punto limpio...
  • Page 73 Products designed to be operated del suo ciclo di vita. MSI si adeguerà a tale Direttiva at closer proximities, such as tablet computers, comply with applicable EU requirements in typical ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del...
  • Page 74 Copyright © 2021 All rights reserved. contact your place of purchase or local distributor. The MSI logo used is a registered trademark of Alternatively, please try the following help resources Micro-Star Int’l Co., Ltd. All other marks and names for further guidance.

Table of Contents