Table of Contents
Advertisement
▶ Integrated Graphics Configuration sub-menu (optional)
Adjusts integrated graphics settings for optimum system. This sub-menu is only
available when using the CPU which integrate with IGP.
▶ USB Configuration sub-menu
Sets the onboard USB controller and device function. Press Enter to enter the
sub-menu.
▶ Power Management Setup sub-menu
Sets system Power Management of ErP and AC Power Loss behaviors. You can
optimize the system power consumption in this menu.
▶ Windows OS Configuration
Sets Windows detailed configuration and behaviors. You also can set the secure
boot and control key management to prevent the unauthorized accessing for
system.
▶ Wake Up Event Setup sub-menu
Sets system wake up behaviors for different sleep modes.
▶ Secure Erase+
Enables or disables Secure Erase+ function. Secure Erase+ is the best way to
effectively wipe all data from a SSD. Please note that data of SSD will be erased
after enabling Secure Erase+.
▶ NVMe SSD Self-Tests
Enables or disables the NVMe SSD self-test function to ensure it is functioning
properly. Only the NVMe 1.3 or above SSD can support this function.
▶ Realtek PCIe GbE Family Controller (MAC sub-menu
This sub-menu shows driver information and configuration of the Ethernet
controller parameter.
▶ Boot sub-menu
Use this menu to set the system boot states and the sequence of system boot devices.
▶ Security sub-menu
Use this menu to set the administrator password and the user password for system
security. This menu also allows you to set the TPM (Trusted Platform Module)
function.
⚠
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press Enter. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press Esc key to abort the selection.
To clear a set password, press Enter when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶ Save & Exit
This menu allows you to load the BIOS default values or factory default settings into
the BIOS and exit the BIOS setup utility with or without changes.
65
UEFI BIOS
Advertisement
Table of Contents
