Dynamic Range Control - Pioneer Elite VSX-56TXi Operating Instructions Manual

11 Advanced setup
• If the YES or PLUS setting on the subwoofer is
selected (in Speaker Setting on page 51), the test tone
will only play back from the subwoofer. If not, the test
tone will play back from the front and surround
speakers set to LARGE.
4 When you're finished, select 'Exit'.
You will return to the Expert setup menu.
90
En

Dynamic Range Control

• Default setting: OFF
This setting specifies the amount of dynamic range
adjustment to Dolby Digital and DTS movie soundtracks.
You may want to use this when listening to surround
sound at low volumes.
1 Select 'D-Range Control' from the Expert setup
menu.
Expert
[ Crossover Network ]
[ Fine Channel Level ]
[ Fine Channel Delay ]
[ Acoustic Cal EQ
[ Bass Peak Level
[ D-Range Control
[ Exit
2 Choose the setting that you want.
Dynamic Range Control
Select Mode
dts
• OFF – No dynamic range adjustment (use when
listening at higher volume).
• MID – Mid setting.
• MAX – Dynamic range is reduced (loud sounds are
reduced in volume while quieter sounds are
increased)
3 When you're finished, select 'Exit'.
Dynamic Range Control
Select Mode
dts
You will return to the Expert setup menu.
Tip
• For general dynamic range control, you can use the
Midnight listening mode (see Using Midnight and
Loudness listening on page 45) on a variety of
sources that are not Dolby Digital or DTS encoded.
]
]
]
]
[ OFF ]
[ MID ]
[ MAX ]
[ Exit ]
[ OFF ]
[ MID ]
[ MAX ]
[ Exit ]