Display - Pioneer Elite VSX-56TXi Operating Instructions Manual

04 Controls and displays

Display

1
8
1 SIGNAL indicators (page 42)
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically.
2 Digital format indicators
• PRO LOGIC II – Lights during Dolby Pro Logic II and
Pro Logic IIx processing.
• Neo:6 – Lights during Neo:6 processing with 2-
channel sources.
• 2 DIGITAL – Lights when a Dolby Digital signal is
detected.
• DTS – Lights when a DTS signal is detected.
• ES – Lights when a DTS-ES signal is detected.
• EX – Lights when a Dolby Digital EX signal is
detected.
• STEREO – Lights during 2-channel playback.
3 LOUDNESS (page 45)
Lights when Loudness listening is active.
4 MIDNIGHT (page 45)
Lights when Midnight listening is active.
5 TONE (page 45)
Lights when the tone control is switched on.
6 DNR (page 46)
Lights when digital noise reduction is switched on.
7 Tuner indicators
STEREO (page 47)
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
MONO (page 48)
Lights when the tuner MPX mode is set to mono.
TUNED
Lights when tuned to a broadcast.
8 SB CH (page 43)
Indicates the surround back channel (or Virtual Surround
Back) setting (AUTO, ON or OFF).
34
En
2 3
9 10 11
4 5 6
9 Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS, S and RS will light at the same time to indicate 6.1
channel sources.
• L – Left front channel
• C – Center channel
• R – Right front channel
• LS – Left surround channel
• S – Surround channel (mono) or surround back
channel
• RS – Right surround channel
• LFE – Low frequency effects channel
• – Lights when an LFE signal is detected
10 Speaker indicators (page 67)
Lights to indicate the current speaker system, A and/or B.
11 Listening mode indicators (page 37)
Shows MOVIE or MUSIC when a surround listening
mode is selected. DSP will light with a box around it when
one of the advanced (DSP) listening modes is selected.
12 Hi-BIT/SAMPLING (page 44)
Lights when the audio scaler is switched on.
13 MULTI-ROOM (page 69)
Lights when the multi room feature is active.
14 Volume level indicator
7
12 13 14