The Expert Setup Menu - Pioneer Elite VSX-56TXi Operating Instructions Manual

11 Advanced setup

The Expert setup menu

The settings in the Expert setup menu are more
advanced features of this receiver that you can use to
make detailed adjustments when you're more familiar
with the system. Before making these settings, you
should have already completed Automatically setting up
for surround sound on page 12.
You only need to make these settings once (unless you
change the placement of your current speaker system or
add new speakers).
1 Make sure your receiver and TV are both
switched on.
2 Using the remote control, press RECEIVER, then
press the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
(cursor up/down) buttons and ENTER on the remote
control to navigate through the screens and select menu
items.
Tip
• You can also use the front panel display to make
settings. You can also use the MULTI JOG dial and
ENTER on the front panel instead of the
up/down) buttons and ENTER on the remote control.
3 Select 'Surround Setup' then press ENTER.
System Setup
[ 1. Surround Setup
[ 2. THX CINEMA Setup ]
[ 3. Input Assign
[ 4. Function Rename
[ 5. SACD Setup
[ 6. PHONO/LINE Setup ]
[ 7. Multi Room
[ 8. 12V Trigger
[ Exit
82
En
RECEIVER
RECEIVER
SYSTEM SETUP
ENTER
1.Surround Setup
]
[ SurrBack System ]
[ Auto Setting ]
]
[ Normal ]
]
[ Expert ]
]
[ Exit ]
]
]
]
4 Select 'Expert' then press ENTER.
5 Select the setting you want to adjust.
• Crossover Network– Specify which frequencies will
be sent to the subwoofer (see Crossover Network
below).
• Fine Channel Level – Make fine adjustments to the
overall balance of your speaker system (see Fine
Channel Level below).
• Fine Channel Delay– Make precise delay settings for
your speaker system (see Fine Channel Delay on
page 84).
• Acoustic Cal EQ – Measure the acoustic
characteristics of your room and make detailed
adjustments to the frequency balance of your
speaker system (see Acoustic Calibration EQ on
page 84 and Professional Acoustic Calibration on
page 87).
• Bass Peak Level – Prevent bass tones from distorting
the sound from your speakers (see Bass Peak Level on
page 89).
• D-Range Control – Specify the amount of dynamic
range adjustment to Dolby Digital and DTS movie
soundtracks (see Dynamic Range Control on
page 90).
6 Make the adjustments necessary for each
setting, pressing ENTER to confirm after each
(cursor
setting.
When you're finished, you can select Exit, then press
ENTER to go back to the System Setup menu.
1.Surround Setup
[ SurrBack System ]
[ Auto Setting ]
[ Normal ]
[ Expert ]
[ Exit ]
Expert
[ Crossover Network ]
[ Fine Channel Level ]
[ Fine Channel Delay ]
[ Acoustic Cal EQ ]
[ Bass Peak Level ]
[ D-Range Control ]
[ Exit ]