Using The Multi-Room Controls - Pioneer Elite VSX-56TXi Operating Instructions Manual

10 Other connections

Using the multi-room controls

You can use the front panel controls to adjust the sub
room volume and select sources.
1 Press the MULTI ROOM & SOURCE ON/OFF
button on the front panel.
The MULTI ROOM indicator lights and MR&S ON
appears in the front panel display to indicate the multi-
room control has been switched on.
2 Press CONTROL.
Make sure that any operations for the sub room are done
while MULTI-ROOM shows in the display. If MULTI-
ROOM is not showing, the front panel controls affect the
main room only.
3 Use the MULTI JOG dial to select the source.
Select between DVD/LD, TV/SAT, VCR 1/DVR, CD, CD-
R/TAPE 1 or TUNER (in that order).
• If you select TUNER, you can use the front panel
TUNER controls to select a preset station (see
Listening to memorized station presets on page 49 if
you're unsure how to do this).
4 Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the VARIABLE
volume control in Multi-Room and IR receiver setup on
page 81.
5 When you're finished, press CONTROL again to
return to the main room controls.
You can also press the MULTI ROOM & SOURCE ON/
OFF button on the front panel to switch off all output to
the sub room.
Note
• Multi-room can't be used when you're setting up the
system (from the on-screen System Setup menu).
70
En
• You won't be able to switch the main room off
completely unless you've switched off the multi-room
control first.
• The tuner cannot be tuned to more than one station
at a time. Therefore, changing the station in one
room also changes the station in the other room.
Please be careful not to change stations when
recording a radio broadcast.
• The volume levels of the main and sub rooms are
independent.
• If you don't plan to use the multi-room feature for
awhile, turn off the power in both the sub and main
rooms. Make sure the STANDBY indicator turns red
and the MULTI-ROOM indicator goes off.