Standard Timer Recording - Pioneer DVR-310-S Operating Instructions Manual

Recording
06
3 Use
cursor to the recording start date and time on the
grid.
Easy Timer Recording
AM
8:
00
12/13
12/14
12/15
12/13
CHANNEL + / –
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can't therefore be selected. The lighter area is time
that's available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN.
5 Use the
cursor to the recording end time on the grid.
Easy Timer Recording
AM
11: 00
12/13
12/14
12/15
12/13
CHANNEL + / –
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to 6 hours can be set.
6 Press ENTER to set the end time and exit the
timer recording screen.
• You can check the timer program you just set from
the main timer recording screen (see Standard timer
recording below).
46
En
(cursor buttons) to move the
Current time
Recording start time
PM
9: 10: 11: 12: 1: 2:
00 00 00 00 00 00
11:45 - -:- -
WED AM
32 FINE
REC MODE
(cursor left/right) to move the
Recording start time
Recording end time
PM
12: 00 1: 00 2: 00 3: 00 4: 00 5:
11:45 1:45
WED AM PM
32 FINE
REC MODE

Standard timer recording

The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Recording (View)).
This screen shows all the timer programs currently set.
00
• The amount of free space available on the currently
loaded recordable DVD is shown towards the bottom
of the screen.
• In the lower-right corner, the number of timer
programs already set is shown.
• Each row is for one timer recording program, with the
date and time information, frequency, channel,
recording mode and whether there's enough space
to record.
• If there are more than eight timer programs already
set, press NEXT
the PREV
• You can also clear a timer program by highlighting it
and pressing CLEAR.
CLEAR
ENTER
HOME
MENU
TIMER REC
Timer Recording
Date Start Stop CH Mode Result
12/13 WED 7:00 PM 8:00 PM 32 SP
New Input
DVD Remain 1h00m(FINE)
to switch page (go back using
button).
OK
1/1