Navigating Discs - Pioneer DVR-310-S Operating Instructions Manual

Playback
05

Navigating discs

ALL
During playback you can easily jump to another title,
chapter or track on a disc using the number buttons on
the remote, or the SMART JOG dial on the front panel.
DVD-Video Video mode
1 During playback use the number buttons to
enter a chapter number within the current title.
For example, for chapter 6, press 6; for chapter 24,
press 2, then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new chapter.
VR mode
1 During playback, use the number buttons to
input a title number.
For example, for title 6, press 6; for title 24, press 2,
then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new title.
34
En
CLEAR
ENTER
CD Video CD WMA/MP3
1 During playback, use the number buttons to
input a track number.
For example, for track 6, press 6; for track 24, press 2,
then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new track.
Using the front panel controls
1 Use the FUNCTION button to select one of the
following:
DVD
• TITLE – – Enter a title number
• CHP – – – Enter a chapter number within the current
title
CD Video CD
• TRACK – – Enter a track number
WMA/MP3
• FOLDER – – Enter a folder number
• TRACK – – – Enter a track number within the current
folder
2 Turn the SMART JOG dial to select a title/
chapter/folder/track number.
After you stop turning the SMART JOG dial, playback
jumps to the point specified after a few seconds.