Change The Login Password; Local Management - TP-Link Archer AC1900 User Manual

Chapter 13
• To reset the router to factory default settings:
1. Click FACTORY RESTORE
2. Wait a few minutes for the resetting and rebooting.
Note:
• During the resetting process, do not turn off or reset the router.
• We strongly recommend you backup the current configuration settings before resetting the router.
13 3

Change the Login Password

The account management feature allows you to change your login password of the web
management page.
Note: If you are using a TP-Link ID to log in to the web management page, the account management feature will be
disabled. To manage the TP-Link ID, go to
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
section.
3. Enter the old password, then a new password twice (both case-sensitive). Click SAVE.
4. Use the new password for future logins.
13 4

Local Management

This feature allows you to limit the number of client devices on your LAN from accessing
the router by using the MAC address-based authentication.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced
Management section as needed.
to reset the router.
Advanced > TP-Link
> System > Administration
> System > Administration
ID.
and focus on the
and complete the settings In
Manage the Router
Change Password
Local
73