Remote Management - TP-Link Archer AC1900 User Manual

Chapter 13
13 5

Remote Management

This feature allows you to control remote devices' authority to manage the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Management section as needed.
• Forbid all devices to manage the router remotely:
Do not tick the Enable
• Allow all devices to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTP port as default settings (recommended) or enter a value between
1024 and 65535.
3. Select All Devices
4. Click SAVE.
Devices on the internet can log in to
as http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on
• The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTP port as default settings (recommended) or enter a value between
1024 and 65535.
3. Select Specified Device
4. In the Only this IP Address
the router.
5. Click SAVE.
System > Administration
checkbox of Remote
Remote Management.
for Remote Managers.
http://Router's WAN IP address:port number
Network Map
Remote Management.
for Remote Managers.
field, enter the IP address of the remote device to manage
and complete the settings in
Management.
> Internet.
Set Up a Dynamic DNS Service Account
Manage the Router
Remote
(such
if you want to log
75