Changing The Background Color Of The Screen; Turning The Screen Saver On And Off; Resetting The Player To System Settings - Pioneer DV-626D Operating Instructions Manual

Changing the Background
Color of the Screen
You can select a blue or black background to appear
when the player is in the stop mode.
Make changes to the [Background Color] setting in the
Setup screen General menu in the "Expert" menu
mode (page 30).
Audio1 2 Video Language
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Screen Saver – On
Background Color
Move
Settings: Black
Blue*
Other
When "Other" is selected
This player gives you the option of creating your own
background color by adjusting the red, green and blue
levels.
Audio1 2 Video Language
Background Color
Move
–/+
ENTER
1
Move the cursor control joystick up or down
to select a color bar.
The selected color bar becomes highlighted.
2
Move the cursor control joystick right or left to
adjust the level of the color.
As the color bar is adjusted, the square on the right
side of the screen indicates how the current mix of
the three colors appears.
3
Repeat steps 1 and 2 until you have achieved
a color that you like.
4
Press ENTER to set the color as the
background color.
Expert
General
– Expert
Black
Blue
Other
Exit
SETUP
*Factory setting
General
Return
Select Exit
SETUP
Turning the Screen Saver On
and Off
Expert
As a protective function against residual images on the
TV screen or monitor, a phenomenon referred to as
"screen burn", the screen saver appears when the
same screen has been displayed for a length of time. By
default, the screen saver is turned off. However, the
screen saver function can be turned on and off at your
discretion.
Make changes to the [Screen Saver] setting in the Setup
screen General menu in the "Expert" menu mode (page
30).
Audio1 2 Video Language
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Screen Saver
Background Color -
Move
Settings: On
Off
Resetting the Player to System
Settings
To reset the player, press and hold 7 (stop) on the front
panel when pressing STANDBY/ON (POWER) on the
front panel to turn the unit from standby to on.
All program memory, saved settings from functions such
as Last Memory and Condition Memory are cleared, and
all Setup screen menus are returned to factory settings.
General
– Expert
On
Off
Exit
SETUP
61