Playback In A Desired Order (Program Play); Programming Dvds - Pioneer DV-626D Operating Instructions Manual

Playback in a Desired Order
(Program Play)
The titles and chapters within a title on a DVD and
similarly the tracks on a Video CD or CD can be arranged
to play in the order you want.

Programming DVDs

A program with a maximum of 24 steps can be
memorized.
2,3
(Cursor)
STOP 7
7
4 ¢
e
4
1
Press PROGRAM.
The Program screen appears.
Program Chapter Program Title
Current: Title 7 Chapter 1
Title 1 (Chapter 1~ 18)
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
Program Memory – Off
Move Play Exit
ENTER PROGRAM
2
Move the cursor control joystick right or left to
select either Chapter or Title program.
3
Once the program type is selected. Move the
cursor control joystick down to enter the
program window.
When "Program Chapter" is selected, you must
also select what title the chapters to be
programmed are in. Use the cursor button (5) to
highlight "Title" and then use the number buttons
to enter the title number to be used.
– DVD/Video CD/CD
5
(ENTER)
3 8
1 ¡
E
CLEAR
1
Program Chapter Program Title
2(/20)
Current: Title
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
Program Memory – Off
Move ENTER Play Exit
PROGRAM
4
In the program window, use the number
buttons to enter the numbers of the titles or
chapters in the order you want to program
them in.
• To program DVD titles/chapters 9, 7, and 18 in
order, press 9, 7, +10 and 8.
Program Chapter Program Title
Current: Title 7 Chapter 1
1
Title (Chapter 1~ 18)
09 07 18 –– –– –– –– ––
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
Program Memory – Off
Move Play Exit
ENTER PROGRAM
5
Press ENTER.
• Playback starts in the set order.
• Press PROGRAM to return to the previous
display. The program will not begin until PLAY 3
is pressed.
To program a pause in a program
Press PAUSE 8 instead of a number button.
"8" appears on the screen and the pause can be
programmed.
A pause cannot be programmed as the first or last
position in a program, and two or more pauses cannot
be programmed in succession.
To delete a number:
Move the cursor control joystick to highlight the
incorrect number and then press CLEAR.
The number is deleted. If the number was before
another number, the later numbers are reordered
automatically.
To insert a number:
Move the cursor control joystick to highlight the number
to be placed after the new number and then press the
number button(s) of the number to be inserted.
The new number is inserted before the previously
selected number.
To stop program play
Press STOP 7.
Notes
• When programming chapters, chapters not programmed may
appear on the screen. This is not a malfunction.
• Programming may not be possible with certain DVD discs. On
these types of discs, the
when programming is attempted.
• Only chapters within the same title can be programmed during
chapter programming.
Program Chapter Program Title
2(/20)
Current: Title
07 18 –– –– –– –– ––
09
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
Program Memory – Off
Move ENTER Play PROGRAM Exit
mark will appear on the screen
51