Turning The Screen Saver On And Off; Changing The Background Color Of The Screen - Pioneer Elite DV-C36 Operating Instructions Manual

Turning the Screen Saver On
and Off
Expert
As a protective function against residual images on the
TV screen or monitor, a phenomenon referred to as
"screen burn", the screen saver appears when the
same screen has been displayed for a length of time. By
default, the screen saver is turned on. However, the
screen saver function can be turned on and off at your
discretion.
Make changes to the [Screen Saver] setting in the
Setup screen General menu in the [Expert] menu mode
(page 27).
Audio1 Audio2
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Background Color -
Settings: On
Off*
44
Video Language General
– Expert
Screen Saver On
Off
Move Exit
SETUP
*Factory setting
Changing the Background
Color of the Screen
You can select a blue or black background to appear
when the player is in the stop mode.
Make changes to the [Background Color] setting in the
Setup screen General menu in the [Expert] menu mode
(page 27).
Audio1 Audio2
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Screen Saver – On
Background Color
Move
Settings: Black
Blue*
Other
When "Other" is selected
This player gives you the option of creating your own
background color by adjusting the red, green and blue
levels.
Audio1 Audio2 Video
Background Color
Move
–/+
1
Use the cursor buttons (5/∞) to select a
color bar.
The selected color bar becomes highlighted.
2
Use the cursor buttons (2/3) to adjust the
level of the color.
As the color bar is adjusted, the square on the right
side of the screen indicates how the current mix of
the three colors appears.
3
Repeat steps 1 and 2 until you have
achieved a color that you like.
4
Press ENTER to set the color as the
background color.
Expert
Video Language General
– Expert
Black
Blue
Other
SETUP Exit
*Factory setting
Language General
Return
RETURN
Select Exit
ENTER SETUP