Making Connections; Connecting Your Dvd Player - Pioneer DV-626D Operating Instructions Manual

Making
Connections

Connecting Your DVD Player

Unlike any other audiovisual media format, DVD offers a
wide array of audio and video output options which
allows playback to be enjoyed in any number of system
configurations from a standard TV with stereo audio
input to a home theater system with a projection
monitor and full surround sound capabilities.
DIGITAL OUT
OPT.
CONTROL
TV SYSTEM
OUT IN
NTSC
Video cord
(Included)
Make video connections from the one of the
VIDEO OUT jacks on the player to the VIDEO
IN jack on the TV or monitor using the video
cord included with the player. Set the VIDEO
OUT SELECT to the left position.
COMPONENT
VIDEO OUT
Y
S-VIDEO OUT
VIDEO OUT
VIDEO
1 1
P
OUT
B
SELECT
PAL
AUTO
2 2
P
R
S-VIDEO IN
VIDEO IN
Connection Guide
The illustration on this page shows the basic setup using
the audio and video cords included with this player. Use
this illustration as a guide to setting up your home
system.
An explanation of each type of audio and video
connection available can be found on pages 17 to 19. To
determine the best audio and video connection setup for
your system, refer to the manuals supplied with the
components you are making connections to.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General menu to set whether you are using a wide
screen or standard size TV or monitor (page 22).
Additionally, you can use the [TV Screen] setting in the
Setup screen Video menu (page 34).
Notes
• When making connections to this unit or when changing
connections, check that the unit is off by pressing
STANDBY/ON (POWER) and unplug the power cord from
the power outlet.
• The analog video output on this player uses copy protect
circuitry to prevent the video playback on DVDs from being
copied. If you connect the player to a TV via a VCR, or record
and play back the contents of a disc with a VCR, the playback
picture may not be normal.
AUDIO OUT (2 ch) AUDIO OUT (5.1 ch)
CENTER
L
L
R
R
1 2
SUB
SURROUND
FRONT
WOOFER
Audio cord
(Included)
TV or monitor
Make audio connections from one of the
AUDIO OUT jacks on the player to the
AUDIO IN jacks on the TV or monitor using
the stereo audio cord included with the
player. Be sure to match the color of the
plugs with the color of the jacks (red and
white).
AC IN
Finally, connect to a
power outlet.
L R
AUDIO IN
15