Table of Contents
Advertisement
DRIVE CHAINS
The drive chains are lubricated by a automatic chain oiler using 10W-30 oil. Any time that the discharge
door is raised, a specified amount of oil is sent to the brushes on each of the chains. The oiler is adjust-
able to set the amount that is being discharged. This will extend the life of the drive chains. Keeping the
chains aligned with sprockets will also lengthen the life of the sprockets and drive chains.
CYLINDERS
LUBRICATION
Oiler brushes on
all chains.
The oiler reservoir is
located on the left front
side by the scraper and
jack storage position.
The discharge gate control
cylinder shaft and both front
and rear main auger cylinders
should also be frequently
coated with a rust preventative
spray or lubricate since the
cylinder shaft may remain
extended when not being used
for a period of time.
-32-
Advertisement
Table of Contents
