When the total odometer (ODO) is shown on the multifunction display «1», press the
MODE button «2» for more than three seconds. The colon dividing hours-minutes
starts flashing.
Each time the MODE button «2» is pressed, the hour value is increased for adjust-
ment.
Pressing the MODE button «2» again longer than three seconds activates the minutes
adjustment. The value displayed increases each time the MODE button «2» is press-
ed.
Press the MODE button «2» longer than three seconds to go back to the hour adjust-
01_06
ment.
If no button is pressed within three seconds, the displays automatically exits the clock
adjustment function.
"MODE" button (01_07)
Press the MODE button «2» to shift the instrument panel display.
NOTE
ELECTRICAL COMPONENTS FUNCTION ONLY WHEN THE IGNITION KEY IS
SET TO "ON"
01_07
19