Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 92

Appendix A Adjusting iQ settings
Option Values
Go to the Input On
Lobby when there
Off
is no signal
Audio
Audio In
Volume Range slider
Built-in On
microphone
Off
Noise suppression On
Off
Audio Out
Volume Range slider
Built-in Speakers On
Off
Audio Properties
Balance Range slider
Bass Range slider
Treble Range slider
Date & Time
Automatic Date & On
Time
Off
smarttech.com/kb/171555
Function
When enabled, show the
input previews when there is
no signal.
Sets the microphone's gain.
Enables or disables the
display's built-in microphone.
The default is on.
Enables or disables the noise
suppression filter for the
display's built-in microphone.
The default is on.
Sets the volume from the
speakers
Enables or disables the
display's internal speakers.
Sets the audio output from
the speakers.
Sets the bass level.
Sets the treble level.
Sets the display's date and
time automatically.
Notes
Enable the noise suppression
filter to reduce background
noise when using the
display's built-in
microphone.
When analog speakers are
connected to the display, the
display's internal speakers
are disabled automatically.
Drag the slider all the way to
the left to have all audio from
the left speaker. Drag the
slider all the way to the right
to have all the audio from the
right speaker.
Configure the network to
allow Network Time Protocol
(NTP) requests to internet
time servers. See Connecting
to a network.
User or system
setting
System
System
System
System
System
System
System
System
System
System
92