Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 117

Appendix D Managing SMART Board MX (V2), MX Pro (V2), and later series models using RS-232
To retrieve a setting's current value
Use a get command.
This example shows how to get the volume:
>get volume
volume=55
>
To assign a value to a setting
Use a set command.
This example sets the volume to 65:
>set volume=65
volume=65
>
To increase or decrease the value of a setting
Use the set command to increase or decrease the value by a designated number.
This example increases the volume by 5:
>set volume+5
volume=70
>
This example decreases the volume by 15:
>set volume-15
volume=55
>
smarttech.com/kb/171555 117