Table of Contents
Advertisement
5
|
About the units and options
Installer reference guide
30
PC cable (EKPCCAB4)
The PC cable makes a connection between the hydro PCB (A1P) of the indoor unit
and a PC. It gives the possibility to update the hydro software and EEPROM.
For installation instructions, see:
▪
Installation manual of the PC cable
▪
"11.1.2 To connect the PC cable to the switch
Heat pump convector (FWX*)
For providing space heating/cooling, it is possible to use the following heat pump
convectors:
▪
FWXV: floor-standing model
▪
FWXT: wall-mounted model
▪
FWXM: concealed model
For installation instructions, see:
▪
The installation manual of the heat pump convector
▪
The installation manual of the heat pump convector options
▪
The addendum book for optional equipment
LAN adapter for smartphone control (BRP069A62)
You can install this LAN adapter to control the system via a smartphone app.
For installation instructions, see the installation manual of the LAN adapter and the
addendum book for optional equipment.
WLAN cartridge (BRP069A78)
You can install the wireless LAN cartridge to control the system via a smartphone
app.
For installation instructions, see the installation manual of the WLAN cartridge.
WLAN module (BRP069A71)
As an alternative to the WLAN cartridge, you can install the wireless LAN module
BRP069A71 to control the system via a smartphone app.
For installation instructions, see the installation manual of the WLAN module and
the addendum book for optional equipment.
Universal centralised controller (EKCC8-W)
Controller for cascade control.
Human Comfort Interface (BRC1HHDA) used as room thermostat
▪
The Human Comfort Interface (HCI) used as room thermostat can only be used in
combination with the user interface connected to the indoor unit.
▪
The Human Comfort Interface (HCI) used as room thermostat needs to be
installed in the room that you want to control.
For installation instructions, see the installation and operation manual of the
Human Comfort Interface (HCI) as room thermostat, and the addendum book for
optional equipment.
Smart grid relay kit (EKRELSG)
The installation of the optional Smart grid relay kit is required in case of high
voltage Smart grid contacts (EKRELSG).
4
box" [
134]
ERLA11~16D + EBVZ16S18+23D
Daikin Altherma 3 R F
4P643604-1B – 2022.05
Advertisement
Table of Contents
