ElectrIQ eiq-SV50UHDT2SM Manual page 46

Phase
Adjust the horizontal interfering lines.
Press ▼ / ▲ button to select Phase, then press Enter button
to enter sub-menu.
Position Reset
Press ▼ / ▲ button to select Position Reset, then press Enter
button to enter.
Media OPERATION
Note: Before operating Media menu, Plug in USB device,
then press INPUT button to set the Input Source to Media .
Press ▼ / ▲ button to select Media in the Source menu,
then press Enter button to enter.
Press ◄ / ► button to select the option you want to adjust in
the main Media menu, Media then press Enter button to
enter.
46