Unit Description; Initial Use - Sanitas SBF 11 Operating Instructions Manual

Diagnostic scale
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
• Should you have any questions concerning the use of our devices, please contact your dealer or
customer service.
• All scales comply with EC Directive 2004/108/EC. Should you have any questions concerning the
use of our devices, please contact your dealer or customer service.
Storage and maintenance
The precision of the measured values and service life of the unit depend on careful use:
IMPORTANT
• The scale should be cleaned occasionally with a damp cloth. Do not use abrasive detergents and
never immerse the scale in water.
• Ensure that no liquid gets on the scale. Never dip the scale into water. Never wash it under
running water.
• Do not place any objects on the scale when it is not being used.
• Protect the scale from impacts, moisture, dust, chemicals, large changes in temperature and
sources of heat that are too close (oven, radiator).
• Do not press the buttons using excessive force or with pointed objects.
• Do not expose the scale to high temperatures or strong electromagnetic fields (e.g. mobile
phones).
Batteries
WARNING
• Do not throw batteries into fire. Explosion hazard!
Repairs
IMPORTANT
• Never open or attempt to repair the unit yourself, as otherwise proper function is no longer
guaranteed. Failure to observe this regulation shall void the warranty.
• If you need to have the unit repaired, contact customer service or an authorised dealer.

3. Unit description

Overview
1. Electrodes
2. Display
3. Up key
4. ON button
5. SET button
6. Down key

4. Initial use

Inserting batteries
If provided, pull out the battery insulating strip at the battery compartment or remove the protective
film from the battery and insert the battery with the correct polarity. If the scale fails to operate,
remove the battery completely and reinsert it.
Your scale is provided with a "Change battery" indicator. If the scale is operating with a battery
which is too weak, "LO" appears on the display and the scale will switch off automatically. In this
case, the battery must be exchanged (1 x3 V Lithium CR 2032).
1
12
2
3
4
5
6

Advertisement

Table of Contents
loading

Table of Contents