Indicator Light And Troubleshooting; Care And Maintenance - EcoFlow Wave 2 Add-on Battery User Manual

Indicator Light and Troubleshooting

Off Solid white
Type
Power-on
Power-off
Discharging
level
Charging
level
Firmware update
USB fault
The temperature
is too high
The temperature
is too low
Permanent fault

Care and Maintenance

1. Use or store this product within an ambient temperature range of 20°C-45°C (68°F-113°F),
and keep away from water sources, heat sources, and metal objects.
2. For long-term storage, please recharge the product every three months (discharge it to
0% first, and then charge it to 30-50% for long-term storage). If the battery has been idle
for a long time with low power, it will cause irreversible damage to the battery cells. The
product will not be covered by the warranty if it is not charged or discharged for more than
6 months.
3. For safety, please do not store the product in ambient temperatures higher than 45°C (68°F)
or lower than -10°C (14°F) for a long time.
4. If the product has been idle for too long and the power level is 0%, it will enter a deep
sleep protection mode. Charge the product before using it again.
Indicator status
Flashing white
Indications
LEDs 1-4 turn on in order
LEDs 4-1 turn off in order
≤5%
≤25%
≤50%
≤75%
≤100%
≤25%
75% - 99%
100%
LEDs 2-3 flash alternately
Contact customer service for help.
Restart after the unit temperature drops.
Restart after the unit temperature rises.
Contact customer service for help.
Flashing orange
9