Download Print this page

Advertisement

Contact us:
support@ecoflow.com
www.ecoflow.com
User Manual
EF-1500 External Battery
1. Keep dry and do not expose to high heat. Do not disassemble,
puncture or subject the product to strong external force.
2. Recycle and dispose of the product in accordance with local
regulations.
3. While moving the product, pay attention to safety. Do not
crush your foot.
4. The 24V column is for output only. Do not connect it to an
WARNING
external battery directly or directionally.
5. Do not short-circuit any exposed parts. Children and people
who are intellectually disadvantaged should only use the prod-
uct under supervision.

Advertisement

loading

Summary of Contents for EcoFlow EF-1500

  • Page 1 User Manual EF-1500 External Battery 1. Keep dry and do not expose to high heat. Do not disassemble, puncture or subject the product to strong external force. 2. Recycle and dispose of the product in accordance with local regulations. 3. While moving the product, pay attention to safety. Do not crush your foot.
  • Page 2 EcoFlow will not assume any legal responsibility. Never use parts other than those provided or recommended by EcoFlow. DO NOT install or use the product in any way without following the instructions provided by EcoFlow. Otherwise, you cannot get the free af- ter-sales service from EcoFlow.
  • Page 3 Product Charging 1. Always use a EcoFlow approved charge cable. EcoFlow takes no responsibility if the machine is charged using a non EcoFlow charge cable. 2. When charging, please place the machine on the ground and away from any flammable or combustible materials.
  • Page 4: Table Of Contents

    CONTENTS EF-1500 USE CARE AND SAFETY GUIDE EF-1500’S FEATURES R600 PRO TO EF-1500 CONNECTION SOLAR PANEL CONNECTION IN-VEHICLE CHARGING CONNECTION TECHNICAL SPECIFICATIONS FAQs WHAT’S IN THE BOX...
  • Page 5: Ef-1500 Use Care And Safety Guide

    NOTICE To turn EF-1500 on/off, you need to press and hold the Power Button. Before connecting it to R600 PRO, make sure that EF-1500 is turned off. To enable the 24V +/- power supply interface, press and hold the 24V +/- ON/OFF button while EF-1500 is turned on.
  • Page 6 This port is used to connect R600 PRO to a computer. An expansion power cable is required to charge, dis- charge and upgrade the port. It supports a maximum of 500W charging and 600W discharging of EF-1500. power a free life...
  • Page 7 When none of the ports are in use, the USB Output Indicator Light will start to blink. This shows that the EF- 1500 is in idle mode. After being in idle mode for 5 minutes, the EF-1500's display will go to sleep. At this time, the robot will continue to draw power from its battery.
  • Page 8: R600 Pro To Ef-1500 Connection

    Tighten the screws on both sides of the port to secure the connection. 3. Turn on the power button of R600 PRO, followed by that of EF-1500. If the display of R600 PRO shows the expansion battery pack icon, the connection is successful.
  • Page 9 MC4 port and connect them to our MC4 to XT60 conversion cable. Connect the XT60 cable to the EF-1500’s XT60 input to charge the device. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in Example 2.
  • Page 10: In-Vehicle Charging Connection

    (10-25V DC, 10A max) comply with the specifications of R600, the panels will be able to recharge R600 through the MC4 to XT60 conversion cable. However, EcoFlow will not be responsi- ble for providing free repair services for any damage to the product caused by the quality issue or improp- er operation of the third party solar panels, even during the warranty period.
  • Page 11: Faqs

    How do I care for EF-1500? The EF-1500 is versatile, so it is likely that simple cleaning will be required from time to time. Use dry, non-abrasive cloth to wipe. If you want to wipe more cleanly, we recommend that you use a special deter- gent for mobile phone and computer screen.
  • Page 12: What's In The Box

    WHAT’S IN THE BOX EF-1500 Expansion Power Car Charge Cable Cable (Input) User Manual and Solar Charge Cable (MC4 to XT60 Input) Warranty Card power a free life...