Code Alarm Professional Series CA 5050 Owner's Manual
Code Alarm Professional Series CA 5050 Owner's Manual

Code Alarm Professional Series CA 5050 Owner's Manual

Remote start system with keyless entry professional series
Hide thumbs Also See for Professional Series CA 5050:

Advertisement

PROFESSIONAL
SERIES
CA 5050
Owner's Guide
Remote Start System with
Keyless Entry
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2009 Audiovox Electronics Corporation. All rights reserved.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Professional Series CA 5050 and is the answer not in the manual?

Questions and answers

Summary of Contents for Code Alarm Professional Series CA 5050

  • Page 1: Keyless Entry

    PROFESSIONAL SERIES CA 5050 Owner’s Guide Remote Start System with Keyless Entry IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
  • Page 2 Table of Contents Using Your Remote Control ... 3 Using the Keyless Entry ... 3 Activating Trunk Release (optional) ... 3 Using the Progressive Car Finder Feature ... 3 Using the Personal Protection Alarm ... 3 Valet Mode ... 3 Using Your Remote Vehicle Starter ...
  • Page 3: Using Your Remote Control

    Using Your Remote Control Using the Keyless Entry button is used to lock the vehicle's doors, the vehicle's doors. To lock or unlock the doors simply press and release the desired function button one time. For your convenience, the parking lights will flash once when the doors are unlocked and twice when the door are locked.
  • Page 4 Remote Starting Your Vehicle To activate the remote vehicle start function, press and release the times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will start within 5 seconds.
  • Page 5 Operating the 2 / 3 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine.
  • Page 6: Transmitter Button Functions

    Remote Start Safety Features For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from activating if any of the following occur: The vehicle hood is open. The brake pedal is pressed prior to turning the ignition key to the ON position.
  • Page 7 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI- NALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
  • Page 8 Audiovox Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.

This manual is also suitable for:

Ca 5050

Table of Contents

Save PDF